1. Home
  3. Asphalt Anchor SP58-58, All Stainless, 6-PACK

Asphalt Anchor SP58-58, All Stainless, 6-PACK

SP58 10" long, 5/8" Female thread; with bolt and washer, 5,000 lb. Pull Force, All stainless 304.
Part Number: 01-6358.5SK
Availability: In Stock.
Items per carton: 6
Requires: See calculator on this page
Warranty 180 days
HS Code (Export) 7318.19
NMFC code (trucking) 50
Quantity Price
1 - 3 $160.00
4 - 15 $136.00
16+ $128.00

SP58 is a heavy duty asphalt anchor rated at 5,000 lbs. pull (at 3" asphalt thickness). The 10" long 3-4 stainless anchor is designed to mount speed bumps and kerbs directly to asphalt surfaces.  For technical information, datasheets and installation manuals, please visit our main web site.  

The anchor incorporates a 5/8"-11 UNC (coarse) female thread.  The thread of the bolt inside the anchor should not exceed 4".   The anchor installations requires a 1.5" hole 10" deep and the use of our EPX2 grout.  A 2" welded washer at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.

The SP58 anchors are mounted flush with the surface of the roadway, so that attached devices such as speed bumps can be removed without leaving dangerous screws or protrusions on the roadway.  

The SP58-58K is a set of 6 anchors (K), each pre-installed with a bolt and a washer.  A master carton contains 6 sixpacks (36 bags).

Browse Similar Items

Recently Viewed Items