1. Home
  2. ASPHALT ANCHORS
  3. SP12
  4. Asphalt Anchor SP12-38 12"L 6-PACK
Asphalt Anchor SP12-38 12
SP12-38K SIX-PACK (6) Asphalt Anchors, 3/8

Asphalt Anchor SP12-38 12"L 6-PACK

$51.00
12" long. 3/8" Female thread, with bolt and washer; 2,000 lb. Pull Rated
Part Number: 01-6315.38K
Availability: In Stock.
Items per carton: 6
Requires: Se calculator on this page
Warranty 90 days
HS Code (Export) 7318.19
NMFC code (trucking) 50
Quantity Price
1 - 3 $51.00
4 - 7 $48.45
8 - 15 $45.90
16 - 35 $43.35
36 - 149 $40.80
150+ $38.25

SP12 is a heavy duty asphalt anchor rated at 2,000 lbs. pull. The 12" long anchor is designed to mount plates, fences, machinery directly to asphalt surfaces.  For technical information, datasheets and installation manuals, please visit our main web site.  

SP12-38K incorporates a 3/8"-16 UNC female thread.  The thread of the bolt inside the anchor should not exceed 2.5".   The anchor requires a 7/8" hole 12" deep and the use of a grout such as our EPX2  A 1.4" welded washer at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.

The SP12 anchors are mounted flush with the surface of the roadway, so that attached devices can be removed without leaving dangerous screws or protrusions on the walkway.  

The SP12-38K is a set of 6 anchors, each pre-installed with a bolt and a washer.

Browse Similar Items

Recently Viewed Items

TOP